The broadening of analyte streams, as they migrate through a free-flow electrophoresis (FFE) channel, often limits the resolving power of FFE separations. Under laminar flow conditions, such zonal spreading occurs due to analyte diffusion perpendicular to the direction of streamflow and variations in the lateral distance electrokinetically migrated by the analyte molecules. Although some of the factors that give rise to these contributions are inherent to the FFE method, others originate from non-idealities in the system, such as Joule heating, pressure-driven crossflows, and a difference between the electrical conductivities of the sample stream and background electrolyte. The injection process can further increase the stream width in FFE separations but normally influencing all analyte zones to an equal extent. Recently, several experimental and theoretical works have been reported that thoroughly investigate the various contributions to stream variance in an FFE device for better understanding, and potentially minimizing their magnitudes. In this review article, we carefully examine the findings from these studies and discuss areas in which more work is needed to advance our comprehension of the zone broadening contributions in FFE assays.

SDS capillary gel electrophoresis is a widely used in the biopharma and the biomedical fields for rapid size separation of proteins. However, very limited information is available on the use of dilute and ultra-dilute sieving matrices for SDS-protein analysis. Here, background electrolytes (BGEs) containing 1%-0% dextran were used in borate-based BGE to separate a protein sizing ladder (PSL) ≤225 kDa and the intact and subunit forms of a therapeutic monoclonal antibody (mAb). The separation performance for the PSL and mAb components differed significantly with decreasing dextran concentration. Ferguson and reptation plots were used to elucidate the separation mechanism. Highly diluted dextran solutions resulted in linear Ferguson plots for both solute types (cf. Ogston theory) in spite of this model assumes a rigid pore structure, thus cannot describe the separation mechanism in ultra-dilute polymer solutions with no reticulations. The saddle differences between the resolution of the PSL and the intact/subunit mAb forms in ultra-dilute dextran-borate matrices suggested the importance of shape selectivity, manifested by the adequate separation of the SDS covered intact as well as light and heavy chain subunits of the therapeutic mAb even at zero dextran concentration.

A general theory is presented for the transient dynamic electrophoresis of a spherical colloidal particle in an electrolyte solution under a suddenly applied oscillating electric field. An approximate analytic expression is derived for the transient dynamic electrophoretic mobility, which is applicable for low particle zeta potentials and arbitrary Debye length. It is found that the electrophoretic mobility shows a damped oscillation, approaching its final value, unlike the case where a step electric field is applied.

In sexual assault cases, one of the most common samples collected is a mixed semen stain, which is often found on the vagina, female underwear, or bed sheets. However, it is usually difficult to identify the perpetrator based on this sample alone. One technique that has been developed to address this issue is magnetic bead-based separation. This method involves using modified magnetic microspheres to capture and enrich specific target cells, in this case, sperm cells. In this study, we utilized magnetic beads coupled with ABH blood group antibody to isolate sperm cells from an individual of a single ABO blood type. Subsequently, polymerase chain reaction amplification and capillary electrophoresis were employed to perform the genotyping the short tandem repeat (STR) loci. This approach allows for the identification of different individuals in a mixed seminal stain sample from two individuals, by first separating sperm cells based on ABH antigen differences and subsequently utilizing autosomal STR typing on the enriched single blood group cells.

We present a novel method for fabricating round cross-sectional channels for autoregulatory pressure regulators. The application of previously reported methods in multilayered soft lithography using three-dimensional printed molds is challenging. Herein, we used a thermal expansion technique to create round cross-sectional channels in replica layers using air in the cavity space of a master mold. The width and height of the round channel in the replica could be adjusted in the range of 80-300 and 3-57 µm, respectively, by varying the precuring time of the replica in the gel state and adjusting the cavity size of the master mold. We successfully fabricated a pressure regulator with a round cross-sectional channel, achieving a constant output pressure at a low threshold input pressure. Our device exhibited superior performance, with a constant output pressure at a threshold input pressure of less than 77%, compared to a device with a rectangular cross-sectional channel. Our method has significant potential for application in the fabrication of integrated microfluidic systems with round cross-sectional channels.

Forensic DNA analysis continues to be hampered by the complex interactions between metals and DNA. Metal ions may cause direct DNA damage, inhibit DNA extraction and polymerase chain reaction (PCR) amplification or both. This study evaluated the impact of metal ions on DNA extraction, quantitation, and short tandem repeat profiling using cell-free and cellular (saliva) DNA. Of the 11 metals assessed, brass exhibited the strongest PCR inhibitory effects, for both custom and Quantifiler Trio quantitation assays. Metal ion inhibition varied across the two quantitative PCR assays and the amount of DNA template used. The Quantifiler Trio internal PCR control (IPC) only revealed evidence of PCR inhibition at higher metal ion concentrations, limiting the applicability of IPC as an indicator of the presence of metal inhibitor in a sample. Notably, ferrous ions were found to significantly decrease the extraction efficiency of the DNA-IQ DNA extraction system. The amount of DNA degradation and inhibition in saliva samples caused by metal ions increased with a dilution of the sample, suggesting that the saliva matrix provides protection from metal ion effects.

The use of nucleic acids (NAs) has revolutionized medical approaches and ushered in a new era of combating various diseases. Accordingly, there is an increasing demand for accurate identification, localization, quantification, and characterization of NAs encapsulated in nonviral or viral vectors. The vast spectrum of molecular dimensions and intra- and intermolecular interactions presents a formidable obstacle for NA analytical development. Typically, the comprehensive analysis of encapsulated NAs, free NAs, and their spatial distribution poses a challenge that is seldom tackled in its complete complexity. The identification of appropriate physicochemical methodologies for large nonencapsulated or encapsulated NAs is particularly intricate and necessitates an evaluation of the analytical outcomes and their appropriateness in addressing critical quality attributes. In this work, we examine the analytics of non-encapsulated or encapsulated large NAs (>500 nucleotides) utilizing capillary electrophoresis (CE) and liquid chromatography (LC) methodologies such as free zone CE, gel CE, affinity CE, and ion pair high-performance liquid chromatography (HPLC). These methodologies create a complete picture of the NA's critical quality attributes, including quantity, identity, purity, and content ratio.

Organelle size varies with normal and abnormal cell function. Thus, size-based particle separation techniques are key to assessing the properties of organelle subpopulations differing in size. Recently, insulator-based dielectrophoresis (iDEP) has gained significant interest as a technique to manipulate sub-micrometer-sized particles enabling the assessment of organelle subpopulations. Based on iDEP, we recently reported a ratchet device that successfully demonstrated size-based particle fractionation in combination with continuous flow sample injection. Here, we used a numerical model to optimize the performance with flow rates a factor of three higher than previously and increased the channel volume to improve throughput. We evaluated the amplitude and duration of applied low-frequency DC-biased AC potentials improving separation efficiency. A separation efficiency of nearly 0.99 was achieved with the optimization of key parameters-improved from 0.80 in previous studies (Ortiz et al. Electrophoresis, 2022;43,1283-1296)-demonstrating that fine-tuning the periodical driving forces initiating the ratchet migration under continuous flow conditions can significantly improve the fractionation of organelles of different sizes.

Insertion/deletion polymorphisms (InDels) have particular characteristics, such as a relatively low mutation rate, small amplicon size, and no stutter artifacts when genotyped via the capillary electrophoresis platform. It would be an important complementary tool for individual identification and certain kinship analyses. At present, massively parallel sequencing (MPS) has shown excellent application value in forensic studies. Therefore, in this study, we developed a custom MPS InDel panel that contains 114 InDels [77 autosomal InDels (A-InDels), 32 X-chromosomal InDels (X-InDels), and 5 Y-chromosomal InDels) based on previous studies. To assess this panel's performance, several validation experiments were performed, including sensitivity, inhibitor, degraded DNA testing, species specificity, concordance, repeatability, case-type samples, and population studies. The results showed that the lowest DNA input was 0.25 ng. All genotypes were obtained in the presence of 80 ng/µL humic acid, 2000 µmol/L calcium, 3000 µmol/L EDTA and indigo. In degraded DNA testing, 90% of loci could be detected for 16-day-old formalin-fixed hearts. In addition, this panel has good species specificity. The values of combined power of discrimination and the combined power of exclusion for 77 A-InDels were 1-3.9951 × 10-32 and 1-4.2956 × 10-7 , respectively. The combined mean exclusion chance for 32 X-InDels was 0.99999 in trios and 0.99904 in duos. The validation results indicate that this newly developed MPS multiplex system is a robust tool for forensic applications.

Molecular interactions play a vital role in regulating various physiological and biochemical processes in vivo. Kinetic capillary electrophoresis (KCE) is an analytical platform that offers significant advantages in studying the thermodynamic and kinetic parameters of molecular interactions. It enables the simultaneous analysis of these parameters within an interaction pattern and facilitates the screening of binding ligands with predetermined kinetic parameters. Nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM) was the first proposed KCE method, and it has found widespread use in studying molecular interactions involving proteins/aptamers, proteins/small molecules, and peptides/small molecules. The successful applications of NECEEM have demonstrated its promising potential for further development and broader application. However, there has been a dearth of recent reviews on NECEEM. To address this gap, our study provides a comprehensive description of NECEEM, encompassing its origins, development, and applications from 2015 to 2022. The primary focus of the applications section is on aptamer selection and screening of small-molecule ligands. Furthermore, we discuss important considerations in NECEEM experimental design, such as buffer suitability, detector selection, and protein adsorption. By offering this thorough review, we aim to contribute to the understanding, advancement, and wider utilization of NECEEM as a valuable tool for studying molecular interactions and facilitating the identification of potential ligands and targets.

This work presents a revision of the main applications of capillary electromigration (CE) methods in food analysis and Foodomics. Papers that were published during the period March 2021 to March 2023 are included. The work shows the multiple CE methods that have been developed and applied to analyze different types of molecules in foods and beverages. Namely, CE methods have been applied to analyze amino acids, biogenic amines, heterocyclic amines, peptides, proteins, phenols, polyphenols, pigments, lipids, carbohydrates, vitamins, DNAs, contaminants, toxins, pesticides, additives, residues, small organic and inorganic compounds, and other minor compounds. In addition, new CE procedures to perform chiral separation and for evaluating the effects of food processing as well as the last developments of microchip CE and new applications in Foodomics will be also discussed. The new procedures of CE to investigate food quality and safety, nutritional value, storage, and bioactivity are also included in the present review work.

Adeno-associated virus (AAV) vectors are crucial tools for gene therapy applications. As AAVs are administered in vivo, stringent purity requirements must be met, necessitating the development of various downstream processing strategies in accordance with regulatory guidelines. In this context, we focus on the non-affinity serotype-independent recombinant AAV (rAAV) capture step, which involves the use of Convective Interaction Media (CIM) cation-exchange SO3 monoliths. We analyzed differentially pretreated viral samples obtained from the Sf9 cell line and applied these samples to the capture SO3 chromatography step. We conducted screening experiments using CIM SO3 0.05 mL monolithic 96-well plates with buffers of varying pH, sodium chloride concentrations, and the inclusion of poloxamer 188, aiming to select the optimal binding mobile phase. Dynamic binding capacity was defined for different pretreatments and the optimal conditions were subsequently retested using the industrial purification CIMmultus line. The results demonstrated a high overall vector recovery (51%) and a significant reduction in impurities (99.98% for protein reduction and 99.25% for DNA reduction) using the selected capture step parameters, thereby confirming the successful optimization of the rAAV capture step in the downstream process using monoliths.

Separation of PEGylated protein mixtures into individual species is a challenging procedure, and many efforts have been focused on creating novel chromatographic supports for this purpose. In this study, a new monolithic stationary phase with hyperbranched nanostructures was chemically synthesized. For this, monoliths with a support matrix of poly (glycidyl methacrylate-co-ethylene dimethacrylate) and ethylenediamine chemistry were modified with third-generation dendrons with butyl-end groups. The new monolith was analyzed by infrared spectroscopy, confirming the dendron with butyl ligands and exhibited low mass transfer resistance as observed by breakthrough frontal analysis. This support was able to separate mono-PEG ribonuclease A from the PEGylation mixture, indicated by a single band (∼30 kDa) in the electrophoretic analysis. Moreover, the separation of mono-PEGylated positional isomers was probably observed, as the protein with ∼30 kDa was found in two separate peaks. Interestingly, the dendronized monolith allowed the separation of the reaction mixture into individual PEGylated species when using high ammonium sulfate concentrations (2 M). A correlation between the PEGylation degree and the strength of the hydrophobic interactions on the monolith was observed. This chromatographic approach combines the natural branched architecture of dendrons and the higher capabilities of the monoliths enhancing the hydrophobic surface area, and therefore the interaction between the PEGylated proteins and ligands. Thus, the novel support represents a novel platform for the purification of PEGylated from non-PEGylated proteins with biotechnological applications.

Preferential exclusion chromatography (PXC) sometimes described as hydrophobic interaction chromatography is a well-known, but not widely used technique for purification of Adeno-associated viruses. It employs high molarity of preferentially excluded cosolvent (salt in our case). The downside of this method is that high molarity of salt can lead to aggregation and precipitation of different compounds from the sample. In the case of viruses that are excreted to medium, the concentration of impurities is much lower compared to cell lysates, and PXC can be used as a first chromatographic, serotype independent step to concentrate and purify adeno-associated virus (AAV). Here, we explored PXC for adherent and suspension harvests using monolithic chromatographic columns (CIMmultus). Suspension extracellular adeno-associated virus, serotype 9 (AAV9) harvest had more impurities compared to adherent harvest, therefore it required higher input regarding method development. Final conditions for suspension harvest included higher molarity of binding salt and using more open channel format of chromatographic column (6 µm channel size). Vector genome analysis with droplet digital polymerase chain reaction (ddPCR) revealed 84% and 97% recovery for suspension and adherent AAV9 harvest, respectively. After PXC capture step, adherent AAV9 was purified by already described ion exchange techniques. Overall process vector genome recovery, from clarified harvest to anion exchange elution fraction, was 54% measured by ddPCR. Residual host cell DNA was measured at 40 ng per 1E13 vector genome, and empty AAV was below 5% in final anion exchange chromatography fraction.

RNA virus infection such as the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection shows severe respiratory symptoms on human and could be an obvious individual characteristic for investigations in forensic science. As for biological samples suspected to contain RNA virus in forensic casework, it requires respective detection of viral RNA and human DNA: reverse transcriptase polymerase chain reaction and DNA type (short tandem repeat [STR] analysis). Capillary electrophoresis (CE) has been shown to be a versatile technique and used for a variety of applications, so we preliminarily explored the co-detection of RNA virus and STR type on CE by developing a system of co-detecting SARS-CoV-2 and STR type under ensuring both the efficiency of forensic DNA analysis and safety of the laboratory. This study investigated the development and validation of the system, including N and ORF1ab primer designs, polymerase chain reaction amplification, allelic ladder, CE detection, thermal cycling parameters, concordance, sensitivity, species specificity, precision, and contrived and real SARS-CoV-2 sample studies. Final results showed the system could simultaneously detect SARS-CoV-2 and STR type, further indicating that CE has possibilities in the multi-detection of RNA viruses/STR type to help to prompt individual characteristics (viral infection) and narrow the scope of investigation in forensic science.

Liquid biopsy has shown significant research and clinical implications in cancer. Particularly, the isolation of circulating tumor cells (CTCs) in preclinical studies can provide crucial information about disease progression and therefore may guide treatment decisions. Microfluidic isolation systems have played a considerable role in CTC isolation for cancer studies, disease diagnosis, and prognosis. CTCs are often studied using preclinical animal models such as xenografts or syngeneic models. However, most isolation systems are tested on human cell lines and human blood, whereas less validation studies are done on preclinical samples such as CTCs from mouse models. Here, we demonstrate and evaluate a complete workflow of a sized-based inertial microfluidic device to isolate CTCs from blood using exclusively mouse blood and mouse cancer cell lines. We then incorporate the cytospin, a commonly used method for enumeration of small number of cells in a glass slide to quantify the total cell yield of our workflow.

Microfluidics offers a versatile and promising platform for various applications in biomedical and other fields, boasting cost-effectiveness, rapid analysis time, and a compact equipment footprint. However, achieving controlled and versatile microfluidic motion within implantable devices presents a significant challenge. In this study, we propose a novel bidirectional micro-pump design that leverages two sharp-edge microcantilever arrays, driven by ultrasound, to enable selective flow direction by manipulating the ultrasound frequency. Through systematic numerical simulation, we demonstrate the feasibility of this design and further optimize its performance through comprehensive parametric analysis. This work provides valuable guidance for the practical development of sharp-edge-based acoustic micro-pumps, particularly for potential implantable applications such as controlled drug release and in vivo sampling for advanced diagnostics.

Unique magnetic characteristics of cobalt-ferrite nanoparticles make them suitable for biological imaging and therapeutic applications. Understanding their activity in nanofluids via the ciliary annulus could lead to better contrast agents for magnetic resonance imaging and improved cancer therapy and other medical therapies. This article provides a comprehensive analysis of the theoretical conclusions regarding the transport of a nanofluid by electroosmosis across a ciliary annulus. The nanofluid consists of cobalt-ferrite nanoparticles (CoFe2 O4 ), water (H2 O), and ethylene glycol (C2 H6 O2 ). As part of the investigation into constructing a physical model, mathematical analysis is performed based on the conservation of mass, momentum, and energy. Dimension-free analysis and mathematical constraints are utilized to learn more about the system. By generating differential equations and including suitable boundary conditions, one can obtain exact solutions, which can then be visually inspected. Recent studies have demonstrated an inverse relationship between flow velocity and cilia length, zeta potential, and Helmholtz-Smoluchowski velocity. The streamlines show that the growth of the trapping boluses is affected by several factors, including the nanoparticles' volume fraction, the cilia's length, the amplitude ratio, the eccentricity, and the zeta potential. These results not only shed light on how nanofluids move, but they also have potential applications in microfluidics, heat transfer, and biomedical engineering.

For studying stem cell-derived islet organoids (SC-islets) in an organ-on-chip (OoC) platform, we have developed a reversed-phase liquid chromatography-tandem mass spectrometry (RPLC-MS/MS) method allowing for simultaneous determination of insulin, somatostatin-14, and glucagon, with improved matrix robustness compared to earlier methodology. Combining phenyl/hexyl-C18 separations using 2.1 mm inner diameter LC columns and triple quadrupole mass spectrometry, identification and quantification were secured with negligible variance in retention time and quantifier/qualifier ratios, negligible levels of carryover (<2%), and sufficient precision (±10% RSD) and accuracy (±15% relative error) with and without use of an internal standard. The obtained lower limits of quantification were 0.2 µg/L for human insulin, 0.1 µg/L for somatostatin-14, and 0.05 µg/L for glucagon. The here-developed RPLC-MS/MS method showed that the SC-islets have an insulin response dependent on glucose concentration, and the SC-islets produce and release somatostatin-14 and glucagon. The RPLC-MS/MS method for these peptide hormones was compatible with an unfiltered offline sample collection from SC-islets cultivated on a pumpless, recirculating OoC (rOoC) platform. The SC-islets background secretion of insulin was not significantly different on the rOoC device compared to a standard cell culture well-plate. Taken together, RPLC-MS/MS method is well suited for multi-hormone measurements of SC-islets on an OoC platform.

The alteration of epigenetic modifications, including DNA methylation, can contribute to the etiopathogenesis and progression of many diseases. Among them, facioscapulohumeral dystrophy (FSHD) is a muscular disorder characterized by the loss of repressive epigenetic features affecting the D4Z4 locus (4q35). As a consequence, these alterations are responsible for DNA hypomethylation and a transcriptional-active chromatin conformation change that, in turn, lead to the aberrant expression of DUX4 in muscle cells. In the present study, methylation levels of 29 CpG sites of the DR1 region (within each repeat unit of the D4Z4 macrosatellite) were assessed on 335 subjects by employing primers designed for enhancing the performance of the assay. First, the DR1 original primers were optimized by adding M13 oligonucleotide tails. Moreover, the DR1 reverse primer was replaced with a degenerate one. As a result, the protocol optimization allowed a better sequencing resolution and a more accurate evaluation of DR1 methylation levels. Moreover, the assessment of the repeatability of measurements proved the reliability and robustness of the assay. The optimized protocol emerges as an excellent method to detect methylation levels compatible with FSHD.