Nanoparticles (NPs) possess specific physical and chemical features and they are capable enough to cross cellular barriers and show their effect on living organisms. Their capability to cross cellular barriers have been noticed for their application not only in medicine, electronics, chemical and physical sciences, but also in agriculture. In agriculture, nanotechnology can help to improve the growth and crop productivity by the use of various nanoscale products such as nanofertilizers, nanoherbicides, nanofungicides, nanopesticides etc. An optimized concentration of NPs can be administered by incubation of seeds, roots, pollen, isolated cells and protoplast, foliar spraying, irrigation with NPs, direct injection, hydroponic treatment and delivery by biolistics. Once NPs come in contact with plant cells, they are uptaken by plasmodesmatal or endocytosed pathways and translocated via apoplastic and / symplastic routes. Once beneficial NPs reach different parts of plants, they boost photosynthetic rate, biomass measure, chlorophyll content, sugar level, buildup of osmolytes and antioxidants. NPs also improve nitrogen metabolism, enhance chlorophyll as well as protein content and upregulate the expression of abiotic- and biotic stress-related genes. Herein, we review the state of art of different modes of application, uptake, transport and prospective beneficial role of NPs in stress management and crop improvement.

Esculin is a polyphenol with multiple bioactivities and poor lipophilicity. Therefore, a whole-cell catalytic strategy for esculin acylation was developed to improve its lipophilicity. A total of 12 strains were tested, among which Pseudomonas stutzeri exhibited the highest catalytic activity and mono-acylated regioselectivity. The conversion reached the highest level of 92.7 % at 24 h under the optimal conditions, when vinyl acetate was used as an acyl donor. The catalytic ability of P. stutzeri remained above 60 % after three cycles. Subsequently, five esculin esters with different lengths of fatty chains were synthesized and structurally identified. Of them, esculin-6'-O-octanoate, esculin-6'-O-laurate, and esculin-6'-O-myristate exhibited cytotoxicity on LO2 cells by inducing apoptosis and necrosis. The cytotoxicity of these three esters may attribute to their membrane-disrupting properties. This study provides a novel whole-cell biocatalytic strategy for the acylation of esculin and insight for application of esculin esters as a food additive or drug.

The use of deep eutectic solvents (DES) with buffer as cosolvent (up to 10 % v/v) leads to low-viscous media in which lipases can perform synthetic reactions, instead of hydrolysis. This paper explores the immobilization of Pseudomonas stutzeri lipase (TL) in cross-linking aggregates (CLEA) to deliver robust derivatives that are active in media like choline chloride - glycerol DES with buffer as cosolvent. While the free TL enzyme was markedly inactive in these media, TL-CLEA derivatives perform esterifications and can be reused several times. Overall, results are consistent with previous experiments reported for other lipases in these DES-water media and confirm that CLEA immobilization turns out a very useful and straightforward alternative for generating active (bio)catalysts for DES-aqueous media systems. Immobilized systems open the possibility of performing continuous processes in low-viscous DES-buffer media.

Chinese hamster ovary (CHO) cells are regarded as a prominent host for manufacturing therapeutic proteins. Although conventional strategies for generating recombinant proteins in CHO cells depend on the random integration of a gene of interest (GOI), these established techniques occasionally result in genetically heterogeneous cell lines, which causes diminished expression of the recombinant proteins in the long run. Production instability can be reduced by SSI and creates stable cell lines with a consistent expression of the GOI. In this experiment, we demonstrate the targeted incorporation of a reporter cassette in two PhiC31 pseudo attP sites of CHO cells exploiting the homology-directed repair (HDR) generated by the CRISPR/Cas9 platform. Genes encoding GFP and puromycin resistance marker were precisely inserted into these loci via CRISPR/Cas9. Stable cell lines were suitably produced following antibiotic selection. Junction PCR and fluorescence assay determined targeted integration and expression homogeneity of the reporter cassette, respectively. Taken together, our results indicate the possibility of these two PhiC31 pseudo attP sites as the target sites for site-specific integration of a transgene mediated by CRISPR/Cas9. Furthermore, higher knock-in efficiency and expression homogeneity was observed in the pseudo attP site associated with chromosome 6 compared to the pseudo attP site from chromosome 3.

A silica-chitosan support was employed for laccase immobilization. The hybrid support was obtained using calcium ion as linking agent that coordinates silanol and hydroxyl groups of chitosan. The insoluble biocatalyst was then packed in a column and used in a flow system for phenol removal. The immobilized enzyme reactor (IMER) showed a good storage stability (70 % of activity in 70 days) and good reusability (90-50 % of catalytic activity at the 4th reuse in function of chitosan type). The best performance for the phenol removal was obtained with a low molecular weight chitosan from crab shells at pH 5 and with a flow rate of 0.7 mL/min. The apparent Michaelis-Menten (Vmaxapp, Kmapp) and the inherent (Vmaxinh, Kminh) constants were also determined to evaluate the influence of the phenol structure on the performance of the system. The enzymatic oxidation of a phenol mixture (4-methylcatechol, catechol, caffeic acid, syringic acid, vanillic acid, p-coumaric acid, and tyrosol) was followed for 21 h in a continuous mode by HPLC. The phenol mixture removal of 90 % was also confirmed by Folin-Ciocalteu assay.

A thermostable T1 lipase from Geobacillus zalihae exhibits broad substrate specificity and good potential application in fats and oils. However, structural insight into the enzyme against substrates is poorly understood at the molecular level. Herein, the study aimed to examine interactions between a mutant T1 lipase (Mut-T1 lipase) and selected fatty acids (caprylic, myristic, stearic, oleic, linoleic and linolenic acids) by performing molecular docking and molecular dynamics (MD) simulation. The structure of Mut-T1 lipase obtained by homology modeling was reliable for molecular docking and MD simulation. Molecular docking revealed that Mut-T1 lipase showed low binding affinity for caprylic acid (-4.97 kcal/mol) compared to the other fatty acids (-5.65 to -6.88 kcal/mol). However, the conformation of Mut-T1 lipase-caprylic acid complex was comparably stable during the simulation, in terms of less root-mean square fluctuation. Besides, solvent accessible surface area value of Mut-T1 lipase-fatty acid complexes decreased with increasing chain length of fatty acid. van der Waals interactions were requisite in maintaining complex stability during the binding process. This work provides structural insight into interactions between the lipase and the fatty acids, which will facilitate design and applications of new mutants of T1 lipase in modifying fats and oils.

Chinese hamster ovary (CHO) cells are the leading mammalian cell expression platform for biotherapeutic recombinant molecules yet some proteins remain difficult to express (DTE) in this, and other, systems. In recombinant cell lines expressing DTE proteins, cellular processes to restore proteostasis can be triggered when the folding and modification capabilities are exceeded, including the unfolded protein response and ER-associated degradation (ERAD) and proteasomal degradation. We therefore investigated whether the proteasome activity of CHO cells was linked to their ability to produce recombinant proteins. We found cell lines with diverse monoclonal antibody (mAb) productivity show different susceptibilities to inhibitors of proteasome activity. Subsequently, we applied selective pressure using proteasome inhibitors on mAb producing cells to determine the impact on cell growth and recombinant protein production, and to apply proteasome selective pressure above that of a metabolic selection marker during recombinant cell pool construction. The presence of proteasome inhibitors during cell pool construction expressing two different model molecules, including a DTE Fc-fusion protein, resulted in the generation of cell pools with enhanced productivity. The increased productivities, and ability to select for higher producing cells, has potential to improve clonal selection during upstream processes of DTE proteins.

The sustainability in polyhydroxyalkanoates (PHA) production is drawing increasing attention as the effort to increase the economic feasibility for commercialization pursues. Oleic acid is widely preferred by bacteria but its employment for PHA production makes sustainability rather dubious. This study showed promising poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] content of 68 wt % by lipase genes-harbouring Cupriavidus malaysiensis USMAA2-4 transformant from palm olein and 1-pentanol. High oleic acid content and low oil saturation caused palm olein to outperform crude palm oil, crude palm kernel oil and soybean oil due to its preference for oleic acid shown by previous screening. The transformant showed 8-fold and 40-fold higher lipase activity compared to C. necator H16 and its wild-type respectively. The transformant was unaffected by Co2+ but the growth of C. necator H16 was inversely proportional to Co2+ concentration and the employment of 1-pentanol also ceased its growth and PHA accumulation. Although the inhibitory effect of Fe2+, Cu2+ and Zn2+ at high molarity on LipA decreased PHA content of C. malaysiensis USMAA2-4 transformant by 23-24 wt %, the lipase activity was restorable with high molarity of Ca2+, thus resulted in higher PHA content. The transformant enabled the employment of low-cost 1-pentanol as the precursor for cost-effective PHA production and its preference for palm olein contributed to higher sustainability.

Crop plants have an innate capacity to acclimatize and survive myriad stresses in field conditions. This acclimatization to stress enhances crop stand in field and productivity of plant. Inter alia field crops withstand drought stress (hydropenia) by inducing synthesis or accumulation of osmolytes such as (i) proline and other amino acids, (ii) glycine betaine (GB), (iii) soluble carbohydrates, and (iv) reactive oxygen species (ROS) scavenging system as intrinsic drought antagonizing molecules. Precise in vivo induction of osmolytes and their effect on ROS scavenging system in flax/linseed has not been elucidated. The investigation was carried out to identify a tolerant and susceptible cultivar of flax from a core collection of 53 core accessions and evaluate the role of compatible osmolytes in Linum usitatissimum under hydropenia. We screened eight morphometrically diverse flax genotypes in field under irrigated and un-irrigated condition and classified them as tolerant and susceptible genotypes. Further, we examined the effect of ex-foliar glycine betaine application - a signature molecule involved in drought tolerance, on selected tolerant and susceptible varieties. Our results showed stimulatory impact of glycine betaine on accumulation of ROS scavenging antioxidants, total soluble protein and on its own accumulation. While the ex-foliar application had no inhibitory effect on the growth of plants; accumulation of free proline, amino acids and carbohydrates are inhibited par se in flax. Our findings reveal, flax is a non-accumulator of glycine betaine and exogenous application of glycine betaine enhances its own levels during drought stress.

In today's, society multi-resistant pathogens have become an emerging threat, which makes the search for novel anti-infectives more urgent than ever. A promising class of substances are cyclic lipopeptides like the antifungal jagaricin. Jagaricin is formed by the bacterial mushroom pathogen Janthinobacterium agaricidamnosum. It has shown antifungal activity against human pathogenic fungi like Candida albicans and Aspergillus fumigatus. In addition, jagaricin is nearly non-toxic for plants, which makes it a promising agent for agricultural applications. Cyclic lipopeptides formed by microorganisms originate from their secondary metabolism. This makes it very challenging to determine the inducing factor for product formation, especially for unknown microbial systems like J. agaricidamnosum. In the presented study, a biotechnological process for jagaricin formation was developed, investigating impact factors like the medium, oxygen availability, and phosphate. For this reason, experiments were conducted on microtiter plate, shake flask, and stirred tank bioreactor level. Ultimately, a final maximum jagaricin concentration of 251 mg L-1 (15.5 mgJagaricin∙gCDW-1) could be achieved, which is an increase of approximately 458 % in comparison to previous results in standard glucose medium. This concentration allows the production of significantly higher amounts of jagaricin and enables further experiments to investigate the potential of this substance.

Yarrowia lipolytica strains PGC01003 and PGC202 engineered for succinic acid production were studied and compared to the wild type strain W29. For the first time, these two strains were characterized in a chemically defined medium. Strain growth and organic acid production were investigated in fed-batch mode with glycerol as carbon and energy source. This study evaluated the impact of nitrogen deficiency strategy to redirect carbon flux toward succinic acid synthesis. Strain PGC01003 produced 19 g L-1 succinic acid with an overall yield of 0.23 g g-1 and an overall productivity of 0.23 g L-1 h-1, while strain PGC202 produced 33 g L-1 succinic acid with an overall yield of 0.12 g g-1 and a productivity of 0.57 g L-1 h-1. Nitrogen limitation effectively stopped biomass growth and increased succinic acid yield of PGC01003 and PGC202 by 18 % and 62 %, respectively. However, the specific succinic acid production rate was reduced by 77 % and 66 %, respectively.

Improving productivity and decreasing costs for biotherapeutic agents has been a focal driving force in the manufacturing of biologics. Advances in upstream processes have been continuously outpacing the ability for downstream operations to purify biologics, especially monoclonal antibodies. Continuous chromatography has several benefits for biologic purification including automated control, decreased labor, improved productivity, and more consistent product attributes. The goal of this study was to improve productivity and decrease costs associated with batch-mode and continuous purification processes. Productivities using cellulose nanofibers with a protein A ligand offer greater than 30-fold higher productivities than their resin-based equivalents using periodic countercurrent technology with multiple column chromatography. The smaller columns needed for convective mass transfer, faster processing times, and decreased costs allow for a more efficient mAb capture step. Additionally, high throughput purification (grams of mAbs/day) can be achieved from the scale-down model developed using periodic countercurrent technology. These advancements will help drive the evolution of downstream operations to manage the higher workloads due to increased upstream titers in a cost-effective manner.

Reactive absorption into aqueous solutions promoted by carbonic anhydrase (CA, E.C. 4.2.1.1.) has been often proposed as a post-combustion CO2 capture process. The state of the art reveals the need for efficient biocatalyst based on carbonic anhydrase that can be used to further develop CO2 capture and utilization technologies. The present study is focused on the use of a thermostable CA-based biocatalyst. The carbonic anhydrase SspCA, from the thermophilic bacterium Sulfurihydrogenibium yellowstonense, was in vivo immobilized as membrane-anchored protein (INPN-SspCA) on the outer membrane of Escherichia coli cells. The dispersed biocatalyst, made by cell membrane debris, was characterized in terms of its contribution to the enhancement of CO2 absorption in carbonate/bicarbonate alkaline buffer at operating conditions relevant for industrial CO2 capture processes. The amount of immobilized enzyme, estimated by SDS-PAGE, resulted in about 1 mg enzyme/g membrane debris. The apparent kinetics of the biocatalyst was characterized through CO2 absorption tests in a stirred cell lab-scale reactor assuming a pseudo-homogeneous behaviour of the biocatalyst. At 298 K, the assessed values of the second-order kinetic constant ranged between 0.176 and 0.555 L∙mg-1∙s-1. Reusability of the biocatalyst after 24 h showed the absence of free enzyme release in the alkaline solvent. Moreover, the equilibration of dispersed cell membrane debris against the alkaline buffer positively affected the performances of the heterogeneous biocatalyst. These results encourage further studies on the in vivo immobilized SspCA aimed at optimizing the enzyme loading on the cell membrane and the handling of the biocatalyst in the CO2 absorption reactors.

The application of zinc oxide nanoparticles (ZnO NPs) in agricultural field is emerging and relatively new. In this work, a simple, cost-efficient, non-toxic and eco-friendly method for the green synthesis of ZnO NPs by Senna occidentalis leaf extract has been described. Techniques used to characterize nanoparticles (NPs) were X-ray diffractometer (XRD), UV visible spectroscopy, Particle size analyzer (PSA), Fourier transform infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM). In this study, green synthesized ZnO NPs at 20-40 mg/l solution was used to prime aged seeds of early flowering homozygous mutant (BM6) of Pusa basmati (Oryza sativa), which enhanced germination performance and seedling vigor significantly as compared to zinc sulphate (ZnSO4) priming and conventional hydropriming. The effect of treatment was analyzed by measuring biophysical and biochemical parameter of germinating rice seeds. The seeds treated with ZnO NPs of 20 mg/l concentration showed more than 50 % stimulation in dry weight, relative water uptake of seeds and radicle length of seedling in comparison to other priming solution and control (hydro-primed). Significant growth was also observed in plumule length and fresh weight of seeds in ZnO NPs at 20 mg/l concentration in comparison to control and other priming treatments. At the same concentration of ZnO NPs, there was 23 % stimulation reported in total soluble sugar content and 45 % stimulation in amylase activity. There was also a substantial increase in antioxidant enzymes i.e. superoxide dismutase (SOD), catalase (CAT) and ascorbate peroxidase (APX) activity. Seed priming represents an innovative user-friendly approach to enhance the germination rate, starch metabolic process and triggered zinc acquisition of rice aged seed as an alternative to the conventional priming method.

Regions that offer high levels of sunlight are ideal to produce microalgae. However, as a result of high light intensities, the temperature in photobioreactors can reach temperatures up to 50 °C. Control of temperature is essential to avoid losses on biomass productivity but should be limited to a minimum to avoid high energy requirements for cooling. Our objective is to develop a production process in which cooling is not required. We studied the behaviour of thermotolerant microalgae Picochlorum sp. (BPE23) under four diel temperature regimes, with peak temperatures from 30 °C up to a maximum of 47.5 °C. The highest growth rate of 0.17 h-1 was obtained when applying a daytime peak temperature of 40 °C. Operating photobioreactors in tropical regions, with a maximal peak temperature of 40 °C, up from 30 °C, reduces microalgae production costs by 26.2 %, based on simulations with a pre-existing techno-economic model. Cell pigmentation was downregulated under increasingly stressful temperatures. The fatty acid composition of cell membranes was altered under increasing temperatures to contain shorter fatty acids with a higher level of saturation. Our findings show that the level of temperature control impacts the biomass yield and composition of the microalgae.

Riboflavin is a commercially important compound in the food, pharmaceutical, chemical, and cosmetic industries. The down-regulation of expression levels of ribF, purA and guaC genes involved in the downstream or branch reactions of riboflavin biosynthesis pathway could direct more carbon flux to riboflavin accumulation. In this study, we made an attempt to fine-tune the expression levels of the 3 genes by using synthetic regulatory small RNA to enhance riboflavin production in Escherichia coli. Firstly, each of the 3 genes was knocking down by using 5 different sRNAs, respectively, and a highest increase of 50.2 % in riboflavin titer was achieved by using anti-ribF5 sRNA. Then this sRNA was further co-expressed with 5 anti-purA and 5 anti-guaC sRNAs to simultaneously knocking down 2 or 3 genes. Co-expression of anti-ribF5 and anti-guaC3 led to the highest riboflavin production of 1091.3 mg/L, which was further increased by 97.6 % compared to the base strain. Finally, the expression levels of anti-ribF5 and anti-guaC3 were further fine-tuned by using 4 different promoters. The best strain WY40, in which the two sRNAs were respectively expressed by PJ23100 and PJ23107 promoter, produced 1454.5 mg/L riboflavin with an increase of 163.4 % compared to the base strain. To our knowledge, it's the first study to enhance riboflavin synthesis by simultaneously regulating the expression levels of ribF, purA and guaC genes, which led to a highest yield of 0.147 g/g glucose among all reported riboflavin-producing strains.

An extreme temperature regime beyond desired level imposes significant stress in crop plants. The low and high temperature stresses are one of the primary constraints for plant development and yield. Finger millet, being a climate resilient crop, is a potential source of novel stress tolerant genes. In this study, functional characterization of finger millet DREB2A gene in different abiotic stress conditions was done. This novel EcDREB2A transcription factor isolated from finger millet is a truncated version of DREB2A gene compared to previously reported DREB genes from other plant species. The overexpression of EcDREB2A in transgenic tobacco exhibits improved tolerance against heat stress 42 °C for up to 7 days, by altering physiology and biochemical means. However, same transgenic lines were unable to provide tolerance to 200 mM NaCl and 200 mM Mannitol stress. Under heat stress conditions, increased seed germination with improved lateral roots, fresh and dry weight relative to wild type (WT) was observed. The EcDREB2A transgenics exposed to heat stress showed improved rate of stomatal conductance, chlorophyll and carotenoids contents, and other photosynthesis parameters compared to WT plants. EcDREB2A overexpression also resulted in increased antioxidant enzyme activity (SOD, CAT, GR, POD and, APX) with decreased electrolyte leakage (EL), H2O2, and malondialdehyde (MDA) content than WT plants under heat stress. Quantitative real time expression analysis demonstrated that all eight downstream genes were significantly upregulated in transgenic plants only after heat stress. Our data provide a clear demonstration of the positive impact of overexpression of EcDREB2A providing heat stress tolerance to plants.